Handtops, UMPC - Flipstart pics with bottom cover off

Tiqit cPC FlipStart Sony VGN/U OQO

Handtops and UMPCs

Signup and blog about your Handtop experiences.

Flipstart pics with bottom cover off
handtops.com forums : FlipStart PC : talk about the FlipStart PC

page 1 | 6 posts new topic new blog Store

thread starter

04/06/08 + rr0123

Replies

04/06/08 + snowviper

Wow, nice, I wonder is there any place on the HDD to squish extra 3mm? (so we could used 8mm HDD).

Thank you =)

04/06/08 + rr0123

snowviper said: "Wow, nice, I wonder is there any place on the HDD to squish extra 3mm? (so we could used 8mm HDD)."

I tried, and it almost fit, but the back cover wouldn't lay flat, it bulged a little around where the HD sits. I didn't try to put the battery on anyway for fear that it would get jammed somehow. It's just a tiny bit off though, maybe as little as 1mm. Very frustrating!! Maybe tnkgrl can figure something out when I loan it to her to tinker with.

04/06/08 + funtasticguy

If someone could figure out a way to get an 8mm HDD in the FP, that would be great since it would open us up to larger capacity 1.8" hard drives.

04/06/08 + tknguyen

If you cut away the back cover where the HD sits then it will fit and when you put the battery on the hard drive will be protected. However I replaced the HD with a 60GB Samsung 5 mm drive and it is plenty for me so I do not need to cut away the back cover.

Recent Blog: Dos Programs with OQO

04/06/08 + rr0123

This one shows under the drive.

You must be a member to reply or post. signup or login

FourOneOne NET: CloserCircle | Gamer411 | Profil3